[cisco-voip] UCM 8.x and Spares

[David Zhars]

No I didn't license them to my 4.x install.  I kept them on a shelf in the
event we needed them!

On Thu, Jan 19, 2012 at 8:08 AM, Bill Riley <bill at hitechconnection.net>wrote:

> Yes it will work if you have the DLU’s. Did you register them to your CCM
> on 4.x before the upgrade to 8.x? The upgrade licensing procedure would
> have taken care of this for all of the spare phones. ****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *David Zhars
> *Sent:* Thursday, January 19, 2012 7:47 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] UCM 8.x and Spares****
>
> ** **
>
> Now that the licensing is so different from the 4.x generation, where you
> bought each phone with a license and there were spares (marked with an
> equal sign in the part number), how does all that transfer over to 8.x?
> Say I have a phone with the = on the end of the PN, if I connect it to my
> network running 8.x, will it work (as long as I have enough DLUs or whatnot
> on my CM)?
>
> Thank you.****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120119/f011ff4e/attachment.html>