[cisco-voip] UCM 8.x and Spares

[Ted Nugent]

Technically if you only purchased the (=) spare then you never purchased
the CM license and would not be entitled to the DLUs

On Thu, Jan 19, 2012 at 9:20 AM, Bill Riley <bill at hitechconnection.net>wrote:

> If that is the case you will need to send an e-mail to licensing at cisco.comexplaining what you had and get the DLU’s for the phones. You may have to
> show proof of purchase but I don’t think it will come to that. I did have
> to get the Cisco AM involved once to get the licensing issued for a
> customer.****
>
> ** **
>
> Not sure if you would actually be entitled to the DLU’s or not. If you
> bought the spare part number with the = sign attached then you never
> technically purchased the RTU license to allow you to use that phone with
> CCM. The idea would have been you purchased a phone with the RTU and it
> failed. You then replaced that phone with the spare phone. You only used
> one phone at any given time.****
>
> ** **
>
> ** **
>
> *From:* David Zhars [mailto:dzhars at gmail.com]
> *Sent:* Thursday, January 19, 2012 8:12 AM
> *To:* Bill Riley; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] UCM 8.x and Spares****
>
> ** **
>
> No I didn't license them to my 4.x install.  I kept them on a shelf in the
> event we needed them!****
>
> On Thu, Jan 19, 2012 at 8:08 AM, Bill Riley <bill at hitechconnection.net>
> wrote:****
>
> Yes it will work if you have the DLU’s. Did you register them to your CCM
> on 4.x before the upgrade to 8.x? The upgrade licensing procedure would
> have taken care of this for all of the spare phones. ****
>
>  ****
>
>  ****
>
>  ****
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *David Zhars
> *Sent:* Thursday, January 19, 2012 7:47 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] UCM 8.x and Spares****
>
>  ****
>
> Now that the licensing is so different from the 4.x generation, where you
> bought each phone with a license and there were spares (marked with an
> equal sign in the part number), how does all that transfer over to 8.x?
> Say I have a phone with the = on the end of the PN, if I connect it to my
> network running 8.x, will it work (as long as I have enough DLUs or whatnot
> on my CM)?
>
> Thank you.****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120119/822f0ed5/attachment.html>