[cisco-voip] Moving to 10 digit dialing

[Mike Hyde]

Could someone send me a sample config with both 7 and 10 digit dial working?  Every time I try this, it send the digits after the first 7 are pressed.


On Dec 20, 2011, at 11:35 AM, Mark Holloway wrote:

> Sorry, make that $ not !    My brain is in Unix mode today. :)
> 
> dial-peer 7 < Support 7 digit dialing
> [2-9]......$
> 
> dial-peer 10 < Support 10 digit dialing in your area
> 213[2-9]......$
> 
> dial-peer 11 < Support North American Long Distance
> 1[2-9].........$
> 
> 
> On Dec 20, 2011, at 10:33 AM, Mark Holloway wrote:
> 
> For clarification, I assume this is for North America? If your area code is 213 you could create the following:
> 
> dial-peer 7 < Support 7 digit dialing
> [2-9]......!
> 
> dial-peer 10 < Support 10 digit dialing in your area
> 213[2-9]......!
> 
> dial-peer 11 < Support North American Long Distance
> 1[2-9].........!
> 
> 
> When your area switches to 10 digit and it is enforced by your telco, you could prepend 213 to the dialed digits in dial-peer 7 if needed.
> 
> 
> On Dec 20, 2011, at 9:36 AM, Mike Hyde wrote:
> 
>> Is there a way on a CME/UC5** series system to have both 7 and 10 digit dialing?  Our area is switching to 10 digit dial next year, so we are looking at configuring the system with both till the cutover is done.
>> 
>> 
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>