[cisco-voip] Moving to 10 digit dialing

[Nate VanMaren]

Dial peers are first match, not longest match.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Hyde
Sent: Wednesday, January 25, 2012 9:51 AM
To: Mark Holloway
Cc: cisco-voip VOIP
Subject: Re: [cisco-voip] Moving to 10 digit dialing

Could someone send me a sample config with both 7 and 10 digit dial working?  Every time I try this, it send the digits after the first 7 are pressed.


On Dec 20, 2011, at 11:35 AM, Mark Holloway wrote:

> Sorry, make that $ not !    My brain is in Unix mode today. :)
> 
> dial-peer 7 < Support 7 digit dialing
> [2-9]......$
> 
> dial-peer 10 < Support 10 digit dialing in your area 213[2-9]......$
> 
> dial-peer 11 < Support North American Long Distance 1[2-9].........$
> 
> 
> On Dec 20, 2011, at 10:33 AM, Mark Holloway wrote:
> 
> For clarification, I assume this is for North America? If your area code is 213 you could create the following:
> 
> dial-peer 7 < Support 7 digit dialing
> [2-9]......!
> 
> dial-peer 10 < Support 10 digit dialing in your area 213[2-9]......!
> 
> dial-peer 11 < Support North American Long Distance 1[2-9].........!
> 
> 
> When your area switches to 10 digit and it is enforced by your telco, you could prepend 213 to the dialed digits in dial-peer 7 if needed.
> 
> 
> On Dec 20, 2011, at 9:36 AM, Mike Hyde wrote:
> 
>> Is there a way on a CME/UC5** series system to have both 7 and 10 digit dialing?  Our area is switching to 10 digit dial next year, so we are looking at configuring the system with both till the cutover is done.
>> 
>> 
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.