[cisco-voip] Tac poop pooped Unity Connection Hardware failure

[Scott Voll]

nothing on either side of it for at least 2 hours.  and those are just the
periodic task checks

Scott

On Tue, Jul 17, 2012 at 7:45 AM, Ryan Ratliff <rratliff at cisco.com> wrote:

> The 4:42AM alarm is a monthly self-test that includes a full battery
> discharge, thus the alarm.  I don't recall seeing a battery failure that
> recovered itself, typically once they go they are dead.    Are there any
> other messages around this alarm in the syslog that give a clue as to what
> is going on?
>
> -Ryan
>
> On Jul 17, 2012, at 10:28 AM, Scott Voll wrote:
>
> *OK, I understand that the below message is typically a bug and shows up
> at 4:42am the first of each month.  Have seen it for years now.  *
>
>  At Mon Jul 16 17:54:44 PDT 2012 on node UnityConnection, the following
> HardwareFailure events generated:
>
> hwStringMatch : Jul 16 17:54:30 UnityConnection daemon 4 Director Agent:
> LSIESG_AlertIndication 500605B001AAECE0 BBU disabled; changing WB virtual
> disks to WT Sev: 3.
>
> AppID : Cisco Syslog Agent
>
> ClusterID :
>
> NodeID : UnityConnection
>
>  TimeStamp : Mon Jul 16 17:54:30 PDT 2012
>
> *But I'm not getting it multiple times a month at times other than 4:42am.
> *
>
> *opened a TAC case and they just say it's the bug.  I'm thinking that the
> Battery is going out.  am I incorrect in my thinking?*
>
> *TIA*
>
> *Scott*
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120717/54c71957/attachment.html>