[cisco-voip] cas-custom DS0's, no called-number coming through

[Joseph Mays]

Have a ds0-group configured on an AS5400 as a cas-custom group. The ds0's are on a t1 to a cisco 2400IAD.

AS5400

controller T1 1/0:24
 framing esf
 channel-group 0 timeslots 1-20 speed 64
 loopback network ignore
 ds0-group 20 timeslots 21-24 type e&m-fgb
 cas-custom 20

2400IAD

controller T1 0/0
 mode cas
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-20 speed 64
 ds0-group 20 timeslots 21-24 type e&m-immediate-start
 cas-custom 20

It all works for placing calls, except they never get routed to the correct port on the 2400IAD because the called number does not come through with the call. Any suggestions on how this should be set up?

*Mar 19 06:44:26.039: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Calling Number=, Called Number=, Voice-Interface=0x64868E24,
   Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
   Peer Info Type=DIALPEER_INFO_SPEECH
*Mar 19 06:44:26.039: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_PORT;
*Mar 19 06:44:26.039: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=1
*Mar 19 06:44:26.039: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerSPI:exit at 5931 Connection closed by foreign host.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120723/ff101f7c/attachment.html>