[cisco-voip] CAD login screen, extension box.

[Roger Wiklund]

Thanks Ryan,

Perhaps it's gone in 9.0 =)

/Roger

On Fri, Jun 8, 2012 at 6:01 PM, Ryan LaFountain <rlafount at cisco.com> wrote:
> 80% of the CAD code is shared between UCCX and UCCE. In UCCE, you specify an instrument ID when you login, so I assume this is just carryover from the UCCE CAD code.
>
> That is my best guess, not familiar enough with UCCE to be 100% sure.
>
> Thank you,
>
> Ryan LaFountain
> Unified Contact Center
> Cisco Services
> Direct: +1 919 392 9898
> Hours: M - F 9:00am - 5:00pm Eastern Time
>
>
>
> On Jun 8, 2012, at 11:03 AM, Roger Wiklund wrote:
>
>> I dont get it.
>>
>> Even if you use EM, you still have to specify an IPCC extension for
>> the end user, hence the userid is always tied to the same extension.
>> So userid and password should be enough?
>>
>> /Roger
>>
>>
>> On Fri, Jun 8, 2012 at 4:22 PM, Jason Aarons (AM)
>> <jason.aarons at dimensiondata.com> wrote:
>>> So for testing I can change the username and extension J Someone sits down
>>> at desk they can login with Extension Mobility and into CAD with their
>>> username/extension.
>>>
>>>
>>>
>>> From: cisco-voip-bounces at puck.nether.net
>>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roger Wiklund
>>> Sent: Friday, June 08, 2012 10:09 AM
>>> To: Cisco VOIP
>>> Subject: [cisco-voip] CAD login screen, extension box.
>>>
>>>
>>>
>>>
>>>
>>> Stupid question perhaps, but why is there a box for extension nr when
>>> you login CAD?
>>> You can only have one IPCC extension for the end user so even have
>>> that box there?
>>>
>>> Thanks
>>> /Roger
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>> itevomcid
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>