[cisco-voip] Question: config-register-pool# apply-config

[Mark Holloway]

 This has been sorted out. The Cisco documentation show the command in CME 8.5 which is IOS 15.1-3T but after upgrading the router to CME 8.6  IOS 15.1-4M the command is now present. 


On Jun 13, 2012, at 10:17 PM, Mark Holloway wrote:

> I'm configuring 9951 phones on CME 8.5. I have found two separate Cisco documents that show the following commands as it relates to CME 8.5:
> 
> Router# configure terminal
> 
> Router(config)#voice register pool 1
> 
> Router(config-register-pool)#apply-config
> 
> 
> 
> When I enter "voice register pool 1" on the router there is no apply-config command.  The router is a 2821 running c2800nm-ipvoice_ivs-mz.151-3.T2.
> 
> I can go to "voice register global" and enter "create profile" and the router generates SEPECC882B19D60.cnf.xml. My only hangup is whether I am missing something by not having the apply-config command. 
> 
> 
> Thanks,
> Mark
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120613/8c5e21ca/attachment.html>