[cisco-voip] Calling Party - Call Forward - Route Lists

[Matthew Loraditch]

I would have to imagine it's a bug, You are on a release from 2008, just in the 6.1 train there have been 14 released updates since the version you have, 3  point level releases each with at least one SU a piece to them. As long as you have ESW coverage I would highly recommend going to 6.1.5SU3, it's 3 years newer than what you have.

Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bob Fronk
Sent: Monday, March 12, 2012 9:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Calling Party - Call Forward - Route Lists

Good morning group.

CUCM Version - 6.1.2.1000-13

When calls are forwarded or a remote destination is configured, the caller ID is presented to the PRI and is passed to the number being called.  This is the expected result.

Example - 123-555-7890 calls extension 1105.  1105 is forwarded to 678-9012.  The originating caller ID of 123-555-7890 is seen on 678-9012.

However, at some point during the day, this stops working and the main number is presented to the forwarding device rather than the calling party.  If I reset the Route lists, then this starts working correctly again.  Then later, it stops, reset works, stops.... On and on.

I cannot find a correlating reason why this happens.

Thanks for any input or advice.

Bob
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120312/29b757b3/attachment.html>