[cisco-voip] Anyone successfully upgraded to CUCM 8.6.2.21900-5?

[Matthew Loraditch]

I patched some non production servers fine but they were vmware.


Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284    

Twitter  |  Facebook  | Website  |  Email Support



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roger Wiklund
Sent: Thursday, March 15, 2012 10:03 AM
To: Cisco VOIP
Subject: [cisco-voip] Anyone successfully upgraded to CUCM 8.6.2.21900-5?

I'm running 8.6.2.2000-2 on an MSC-7825-I5.
Downloaded the 8.6.2.2.21900-5 upgrade, checked md5, performed the upgrade without errors.

When I switched versions and the server rebooted it failed on hardware detection with a gray screen saying "Detection error on Legacy mode:"
"Warning, system has been identified as an unsupported hardware platform blah"
After ignoring the TAC warning the system starts but "show hardware"
output is UNKNOWN.

Same think happened on another 7825-I5-server.

I tried upgrading the IBM firmware with the latest 3.6.6 disc.
I found no special hardware requirements in the release note for the new version.

Any ideas?

/Roger
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip