[cisco-voip] Anyone successfully upgraded to CUCM 8.6.2.21900-5?

[Gurpreet Singh Kukreja]

Hi Roger,

Check these:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCts62097
https://supportforums.cisco.com/thread/2118752

Seems related to your issue.


Regards
Gurpreet



On Thu, Mar 15, 2012 at 10:02 AM, Roger Wiklund <roger.wiklund at gmail.com>wrote:

> I'm running 8.6.2.2000-2 on an MSC-7825-I5.
> Downloaded the 8.6.2.2.21900-5 upgrade, checked md5, performed the
> upgrade without errors.
>
> When I switched versions and the server rebooted it failed on hardware
> detection with a gray screen saying "Detection error on Legacy mode:"
> "Warning, system has been identified as an unsupported hardware
> platform blah"
> After ignoring the TAC warning the system starts but "show hardware"
> output is UNKNOWN.
>
> Same think happened on another 7825-I5-server.
>
> I tried upgrading the IBM firmware with the latest 3.6.6 disc.
> I found no special hardware requirements in the release note for the
> new version.
>
> Any ideas?
>
> /Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120319/a724217b/attachment.html>