[cisco-voip] isdn status - layer 1 'shutdown'?

[Erick]

Only difference is thst I see failed for LOS/LOF state.

The provider is admitting an issue.  They are not able to reach the smartjack.  I also get nothing when I issue loopback local line on the controller.

On May 2, 2012, at 5:08 PM, "Fuermann, Jason" <jason.f at shsu.edu> wrote:

> What’s show controllers t1 0/0/0 brief tell you? My guess is you will see a remote alarm. Here is a PRI I’m waiting on to be provisioned.
> 
>  
> 
> T1 0/0/0 is down.
> 
>   Applique type is Channelized T1
> 
>   Cablelength is short 110
> 
>   Receiver has remote alarm.
> 
>   alarm-trigger is not set
> 
>   Soaking time: 3, Clearance time: 10
> 
>   AIS State:Clear  LOS State:Clear  LOF State:Clear
> 
>   Version info FPGA Rev: 08121917, FPGA Type: PRK4
> 
>   Framing is ESF, Line Code is B8ZS, Clock Source is Line.
> 
>   CRC Threshold is 320. Reported from firmware  is 320.
> 
>   Data in current interval (868 seconds elapsed):
> 
>      0 Line Code Violations, 0 Path Code Violations
> 
>      0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 868 Unavail Secs
> 
>   Total Data (last 24 hours)
> 
>      0 Line Code Violations, 0 Path Code Violations,
> 
>      0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
> 
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 86400 Unavail Secs
> 
>  
> 
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Wellnitz
> Sent: Wednesday, May 02, 2012 5:03 PM
> To: Thomas Bader
> Cc: cisco-voip
> Subject: Re: [cisco-voip] isdn status - layer 1 'shutdown'?
> 
>  
> 
> It stopped working this afternoon.
> 
>  
> 
> The provider can't get to their smartjack so I guess I won't worry until they can test clean.
> 
> On Wed, May 2, 2012 at 4:42 PM, Thomas Bader <tbader at netcologne.de> wrote:
> 
> ... has it been working before?
> 
> From my experience Layer 1 is a cabling problem, even if it has been working before.
> 
> All the best,
> 
> Thomas
> 
> 
> Am 02.05.2012 um 22:16 schrieb Erick Wellnitz:
> 
> > IOS 12.4(24)T7
> >
> > I have a PRI which had layer 1 in a 'deactivated' state.  I did a shut - no shut on the controller and now it shows shutdown.
> >
> > Is this to be expected or is there something I'm missing.
> >
> >
> > controller T1 0/0/0
> >  cablelength long 0db
> >  pri-group timeslots 1-24
> >  description pri
> >
> > linecode and framing are indeed the defaults of B8ZS and ESF
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120502/294a7b1b/attachment.html>