[cisco-voip] CUCM/Rightfax SIP Implementation

Michel L. M. B. Perez michelmbperez at gmail.com
Tue Sep 11 14:25:30 EDT 2012


Hello,

I installed the Elastix Linux Distribution, and everything works great. You
can do a test, but for fax solution and to optmize the send and receive for
users and by e-mail, works very great.

;)

--
Michel Perez
Skype: michelmbperez
michelmbperez at gmail.com
http://br.linkedin.com/in/michelmbperez



2012/9/11 Mike J. Erickson <mike.erickson at mindshift.com>

> I have having some difficulties getting my faxing across the CUBE through
> CUCM to Rightfax working.   I have tried several configurations but I
> believe the issue is on the CUBE itself.  When sending test faxes the call
> stays up for approximately 40-50 seconds and drops.  I have run Wireshark
> on the receiving fax and I can see that DCS is not being received from the
> originating fax.  I have had the service provider run a capture and they
> are send the DCS from the originating Fax.  Not sure what to do from here.
> Any suggestions or tips. ****
>
>  ****
>
> Thanks in advance.****
>
> mike****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120911/7659e438/attachment.html>


More information about the cisco-voip mailing list