[cisco-voip] Broadcasting a message to all phones - CUCM 8.6

Nate VanMaren VanMarenNP at ldschurch.org
Sun Feb 17 17:45:57 EST 2013


Upgrade to 9.1 and use the included informacast paging :)

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Isamar Maia
Sent: Sunday, February 17, 2013 8:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Broadcasting a message to all phones - CUCM 8.6

Hi Folks,

We wish to accomplish the following setup using CUCM 8.6 and Unity.

1) One phone will dial to an extension and it will trigger
simultaneous calls to a group of phones
2) Who gets the call, will received the audio from the called
extension but it will be muted, it will not be able to send the audio
back.

The purpose of this scenario is to make possible to a supervisor to
call to all the attendees and send a spoken message to everybody.

How can I do that using CUCM and Unity ?

Thanks,
-- 
Isamar Maia
Cel. VIVO SSA:  (55) 71-9146-8575
Cel. TIM SSA: (55) 71-9185-5264
Fixo:  (55) 71-4062-8688
日本: +81-(0)3-4550-1212
Skype ID: isamar.maia

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.




More information about the cisco-voip mailing list