[cisco-voip] Migration from Nortel

Matt Slaga (AM) matt.slaga at dimensiondata.com
Tue Jun 18 14:21:13 EDT 2013


If it is something you are willing to pay for, www.unimax.com<http://www.unimax.com> has some very interesting products.  2nd Nature would be the product that would assist you.



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Avalos
Sent: Tuesday, June 18, 2013 2:11 PM
To: Candese Perez; cisco-voip at puck.nether.net VOIP
Subject: Re: [cisco-voip] Migration from Nortel


I migrated about 5 Nortel sites to Cisco VoIP.  Depending on the migration path, it can be a chore.
These were option 81C, 61C, and 11's.    not sure what type of switch you're working on.

At the command prompt go into overlay 20, by typing  "LD 20" then return.
Once in overlay 20, you're going to type "prt" return,  then "dnb" return.
It should print out the dial plan for all configured devices.  You're going to want to do a print capture with putty or procom or whatever, becase it'll be a lot of data depending on the size of the switch/DB.

For information on other aspects of the dial plan, you'll probably have to go into different overlays.   For example, in Nortel speak a Route Patter is called a Distant Steering Code.  Those reside in some other overlay, as do CTI RoutePoints, which are called something else.
It's been a good 10 years since I've worked on one of these, but if the OS hasn't changed, this is where I'd start.
You can probably find some cheatsheets on the internet these days.
My experience as a Nortel systems administrator was strictly command line.  We never got into the GUI they introduced. It wasn't all that good.

Keep in mind that Nortel segments where you can change and show the different parameters of a dial plan.  They are seldom found in one spot. You'll have to learn to navigate them a little.  Assuming you're over command line.

Hope this helps some...

-J



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Candese Perez
Sent: Tuesday, June 18, 2013 10:49 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> VOIP
Subject: [cisco-voip] Migration from Nortel

Hello,
I am assisting a customer with migration from a Nortel system to Cisco, and was looking for a way to pull their existing dial-plan/extension information from the Nortel.
Anyone have any experience with this?
TIA
Candese


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130618/fd9b987e/attachment.html>


More information about the cisco-voip mailing list