[cisco-voip] Migration from Nortel

Candese Perez trigena at gmail.com
Wed Jun 19 12:14:04 EDT 2013


Thanks everyone for the info. I believe the customer is running a CS1000.
I don't know that we have funds to purchase another product to extract the
existing configuration, but good to know the tools exist.



On Tue, Jun 18, 2013 at 1:21 PM, Matt Slaga (AM) <
matt.slaga at dimensiondata.com> wrote:

> If it is something you are willing to pay for, www.unimax.com has some
> very interesting products.  2nd Nature would be the product that would
> assist you.****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *James Avalos
> *Sent:* Tuesday, June 18, 2013 2:11 PM
> *To:* Candese Perez; cisco-voip at puck.nether.net VOIP
> *Subject:* Re: [cisco-voip] Migration from Nortel****
>
> ** **
>
> ** **
>
> I migrated about 5 Nortel sites to Cisco VoIP.  Depending on the migration
> path, it can be a chore.****
>
> These were option 81C, 61C, and 11’s.    not sure what type of switch
> you’re working on.****
>
> ** **
>
> At the command prompt go into overlay 20, by typing  “LD 20” then return.*
> ***
>
> Once in overlay 20, you’re going to type “prt” return,  then “dnb” return.
> ****
>
> It should print out the dial plan for all configured devices.  You’re
> going to want to do a print capture with putty or procom or whatever,
> becase it’ll be a lot of data depending on the size of the switch/DB.****
>
> ** **
>
> For information on other aspects of the dial plan, you’ll probably have to
> go into different overlays.   For example, in Nortel speak a Route Patter
> is called a Distant Steering Code.  Those reside in some other overlay, as
> do CTI RoutePoints, which are called something else. ****
>
> It’s been a good 10 years since I’ve worked on one of these, but if the OS
> hasn’t changed, this is where I’d start.  ****
>
> You can probably find some cheatsheets on the internet these days.****
>
> My experience as a Nortel systems administrator was strictly command
> line.  We never got into the GUI they introduced. It wasn’t all that good.
> ****
>
> ** **
>
> Keep in mind that Nortel segments where you can change and show the
> different parameters of a dial plan.  They are seldom found in one spot.
> You’ll have to learn to navigate them a little.  Assuming you’re over
> command line.****
>
> ** **
>
> Hope this helps some…****
>
> ** **
>
> -J****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
> *On Behalf Of *Candese Perez
> *Sent:* Tuesday, June 18, 2013 10:49 AM
> *To:* cisco-voip at puck.nether.net VOIP
> *Subject:* [cisco-voip] Migration from Nortel****
>
> ** **
>
> Hello,
> I am assisting a customer with migration from a Nortel system to Cisco,
> and was looking for a way to pull their existing dial-plan/extension
> information from the Nortel. ****
>
> Anyone have any experience with this?****
>
> TIA****
>
> Candese****
>
>
>
> itevomcid ****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130619/f57a9a44/attachment.html>


More information about the cisco-voip mailing list