[cisco-voip] Presence Rebalance Users Specific Nodes

[Jaime Diez]

Hi Wes,

Yeah this is the only way I know to balance the users just in the desired
nodes, but it has to be performed by hand while with rebalance, users are
being assigned automatically.

Thank you anyway!


On 20 June 2013 19:26, Wes Sisk <wsisk at cisco.com> wrote:

> setting the “User Assignment Mode” to “None.” That will allow manually
> assignment of users to nodes using the system topology interface.****
>
>
>
> ref:
> http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_How_to_Configure_the_System_Topology_on_Cisco_Unified_Presence#User_Assignment_Mode_Recommendations
> ****
>
> ** **
>
> Although, that does go against our best practice recommendation.****
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/9x/presence.html#wp1084332
> ****
>
>
>
> On Jun 20, 2013, at 5:58 AM, Jaime Diez <jaime.diez.net at gmail.com> wrote:
>
> Hi,
>
> I am wondering if it is possible to rebalance users in a Presence cluster
> between just some desired nodes.
>
> Lets put an example:
>
> - 3 subclusters A B C
> - 2 nodes per subcluster
>
> I just want to rebalance users between the two nodes in subcluser A and
> the two nodes in B leaving subcluster C without users assigned.
>
> By design I think it is not possible so I have tried not enable XCP
> services for users connection and authentication thinking that maybe
> Presence would be clever enough not tu assign users there but no luck :(.
>
> Any workaround?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130621/fb13dded/attachment.html>