[cisco-voip] 7961 no automatic dial tone

[David Zhars]

Have a 7961 w/7914 sidecar.  UCM 8.0.

Phone rings, you pick it up, you have to press the ANSWER key.  Pick the
phone up, no dial tone, you need to press NEW CALL to start a call.

I thought the switchhook might be bad, but take the phone off hook and the
screen changes, so it knows it is off hook...

Is there some sort of setting in UCM that I missed that is causing this
behavior?

thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130306/a9ff3889/attachment.html>