[cisco-voip] 7961 no automatic dial tone

[David Zhars]

Hmm... I *would* try this, but it's just this one phone.  None of the
others have any issues.

This looks like a system wide setting.


On Wed, Mar 6, 2013 at 11:06 PM, Rosilto C. Morais Junior <
rosilto.junior at bamo.com.br> wrote:

> Hi try to enable On hook transfer at system -> service parameters ->
> callmanager
>
> Jr,
>
> ***do celular***
>
> Em 06/03/2013, às 21:26, "David Zhars" <dzhars at gmail.com> escreveu:
>
> >
> > Have a 7961 w/7914 sidecar.  UCM 8.0.
> >
> > Phone rings, you pick it up, you have to press the ANSWER key.  Pick the
> phone up, no dial tone, you need to press NEW CALL to start a call.
> >
> > I thought the switchhook might be bad, but take the phone off hook and
> the screen changes, so it knows it is off hook...
> >
> > Is there some sort of setting in UCM that I missed that is causing this
> behavior?
> >
> > thanks.
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130307/bde40f60/attachment.html>