[cisco-voip] 7961 no automatic dial tone

[Ryan Ratliff]

What's line 1 set to on the phone (it should be a DN) and what's your setting for "always use prime line"?

-Ryan

On Mar 7, 2013, at 9:10 AM, David Zhars <dzhars at gmail.com> wrote:

Hmm... I *would* try this, but it's just this one phone.  None of the others have any issues.

This looks like a system wide setting.


On Wed, Mar 6, 2013 at 11:06 PM, Rosilto C. Morais Junior <rosilto.junior at bamo.com.br> wrote:
Hi try to enable On hook transfer at system -> service parameters -> callmanager

Jr,

***do celular***

Em 06/03/2013, às 21:26, "David Zhars" <dzhars at gmail.com> escreveu:

>
> Have a 7961 w/7914 sidecar.  UCM 8.0.
>
> Phone rings, you pick it up, you have to press the ANSWER key.  Pick the phone up, no dial tone, you need to press NEW CALL to start a call.
>
> I thought the switchhook might be bad, but take the phone off hook and the screen changes, so it knows it is off hook...
>
> Is there some sort of setting in UCM that I missed that is causing this behavior?
>
> thanks.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130307/c88d8931/attachment.html>