[cisco-voip] Plans for UCCX Trigger to be e164 ? \+17043384588 ?

[Ryan LaFountain (rlafount)]

Hi Jason,

It is on the roadmap, but the plan is to address it holistically by supporting +E.164 for both Agent DN, CTI Route Point/Port DN, External Phone Number Mask on UCCX devices etc. all at the same time instead of releasing support for individual components.

I believe this is on the roadmap for the 10.0 release, but it may be a stretch goal, but a lot of it depends on when Finesse will support +E.164 as we will not be building support for this into CAD.

Thank you,

Ryan LaFountain
Unified Contact Center
Cisco Services
Direct: +1 919 392 9898
Email: rlafount at cisco.com
Hours: M – F 9:00am – 5:00pm

From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>>
Date: Monday, May 13, 2013 10:31 AM
To: "cisco-voip (cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>)" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: [cisco-voip] Plans for UCCX Trigger to be e164 ? \+17043384588 ?

I can’t add a E164 trigger or CTI Route Point in appadmin?  I can override it in ccmadmin, but first time a Appadmin Data Sync occurs they will break

Is there a roadmap to be able to put full E164 in Appadmin Triggers/CTI Ports?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130513/1442dec4/attachment.html>