[cisco-voip] Directory URI in LDAP sync

[Lelio Fulgenzi]

Thanks for all this feedback everyone. It's great. 

I checked our AD and also called our AD admin and we don't have the msRTCSIP-primaryuseraddress available in our current schema. Just wondering when you might see this attribute? Is it during a LYNC install? Can you extend the schema without installing LYNC? 

I'm thinking of settling on using the mail attribute since it's there, it's populated and I've been told more than likely, it is unique. 

What have others done? 

Lelio 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Data Centre and Communications Facilities 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Ryan Ratliff (rratliff)" <rratliff at cisco.com> 
To: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> 
Cc: "Erick B." <erickbee at gmail.com>, "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Tuesday, November 19, 2013 9:00:28 AM 
Subject: Re: [cisco-voip] Directory URI in LDAP sync 

It's not tied to any particular type of media. It just ties a URI to a phone or user and allows the URI to be routed just like a number. 



-Ryan 


On Nov 18, 2013, at 3:19 PM, Jason Aarons (AM) < jason.aarons at dimensiondata.com > wrote: 




I was thinking SIP URI shouldn’t really be video or audio specific (based on the SDP in the invite). So you could call email at domain.com and get whatever is available. Be it audio or video in the SDP. Register your phone or your EX90 and both ring like a shared line, etc. 



From: cisco-voip [ mailto:cisco-voip-bounces at puck.nether.net ] On Behalf Of Erick B. 
Sent: Monday, November 18, 2013 2:47 PM 
To: Lelio Fulgenzi 
Cc: cisco-voip voyp list 
Subject: Re: [cisco-voip] Directory URI in LDAP sync 



After upgrade from 8.x to 9.x, the field is not mapped to LDAP attribute (is blank). You need to add new LDAP directory entry to get that field mapped or go under Call Routing -> Directory Number and Directory URI and set each DN and Directory URI setting there. 



The SIP URI is used for telepresence mainly so people call you at userid at domainname.com from a video device. 



Still learning this... 



On Mon, Nov 18, 2013 at 11:27 AM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 


Can anyone comment/elaborate on what the Directory URI is used for in the LDAP sync setup screen in v9? It's set to "msRTCSIP-primaryuseraddress" by default. Unfortunately it's not modifiable after the relationship is setup and I'm not sure what to set it to. 

I'll also have to see what value it takes during an upgrade 


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_01100.html#CUCM_RF_LE051F5C_00 


Sent from my iPhone 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 





itevomcid _______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131121/4adc6d93/attachment.html>