[cisco-voip] Directory URI in LDAP sync

Thu Nov 21 11:10:23 EST 2013

	Dear Lelio,

	
	this filed is available in AD ... it's just not visible on any tabs (ndeed 
you can find this in tab Atributes Editor but it have to be enabled by 
Advanced Features option).

	Mostly SIPuri is same as mail field ... so probably you just change this 
entry to mail and should be fine for you.

	
	@All,

	In CUCM 9+ we can have 2 type of Users:

	1) Local user

	2) LDAP user

	
	When we have Local user and entered Directory URI ... and this user is 
mapped with EM and Directory Number then on DN we can see his/her Directory 
URI address.

	When we hae LDAP user and Directory URI address is taken from LDAP (mail) 
... and this user is mapped with EM and Directory Number then on DN we CAN'T 
see his/her Directory URI address.

	
	Any idea why?

	
	Regardsm


	Lukasz

	
	Dnia 2013-11-21 16:47 Lelio Fulgenzi napisał(a):


p { margin: 0; }	


	Thanks for all this feedback everyone. It's great.

	
	I checked our AD and also called our AD admin and we don't have the 
msRTCSIP-primaryuseraddress available in our current schema. Just wondering 
when you might see this attribute? Is it during a LYNC install? Can you 
extend the schema without installing LYNC?

	
	I'm thinking of settling on using the mail attribute since it's there, it's 
populated and I've been told more than likely, it is unique.

	
	What have others done?

	
	Lelio

	
		---

		Lelio Fulgenzi, B.A.

		Senior Analyst, Data Centre and Communications Facilities

		Computing and Communications Services (CCS)

		University of Guelph

		
		519‐824‐4120 Ext 56354

		lelio at uoguelph.ca

		www.uoguelph.ca/ccs

		Room 037, Animal Science and Nutrition Building

		Guelph, Ontario, N1G 2W1
	

		From: "Ryan Ratliff (rratliff)" <rratliff at cisco.com>

		To: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com>

		Cc: "Erick B." <erickbee at gmail.com>, "Lelio Fulgenzi" <lelio at uoguelph.ca>, 
"cisco-voip voyp list" <cisco-voip at puck.nether.net>

		Sent: Tuesday, November 19, 2013 9:00:28 AM

		Subject: Re: [cisco-voip] Directory URI in LDAP sync

		
		It's not tied to any particular type of media.  It just ties a URI to a 
phone or user and allows the URI to be routed just like a number.  
		
			
					-Ryan
				

						On Nov 18, 2013, at 3:19 PM, Jason Aarons (AM) 
<jason.aarons at dimensiondata.com> wrote:
					
					
@font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4;} 
@font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;} p.MsoNormal,
 li.MsoNormal, div.MsoNormal {margin:0in; margin-bottom:.0001pt; 
font-size:12.0pt; font-family:"Times New Roman","serif";} a:link, 
span.MsoHyperlink {mso-style-priority:99; color:blue; 
text-decoration:underline;} a:visited, span.MsoHyperlinkFollowed 
{mso-style-priority:99; color:purple; text-decoration:underline;} 
span.EmailStyle17 {mso-style-type:personal-reply; font-family:"Calibri",
"sans-serif"; color:#1F497D;} .MsoChpDefault {mso-style-type:export-only; 
font-size:10.0pt;} @page WordSection1 {size:8.5in 11.0in; margin:1.0in 1.0in 
1.0in 1.0in;} div.WordSection1 {page:WordSection1;}						
						
							
									I was thinking SIP URI shouldn’t really be video or audio 
specific (based on the SDP in the invite).  So you could call 
email at domain.com and get whatever is available.  Be it audio or video in the 
SDP.  Register your phone or your EX90 and both ring like a shared line, 
etc.

								
											From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On 
Behalf Of Erick B.

											Sent: Monday, November 18, 2013 2:47 PM

											To: Lelio Fulgenzi

											Cc: cisco-voip voyp list

											Subject: Re: [cisco-voip] Directory URI in LDAP sync

									
										After upgrade from 8.x to 9.x, the field is not mapped to LDAP 
attribute (is blank). You need to add new LDAP directory entry to get that 
field mapped or go under Call Routing -> Directory Number and Directory URI 
and set each DN and Directory URI setting there. 

									
											The SIP URI is used for telepresence mainly so people call you at 
userid at domainname.com from a video device. 

									
											Still learning this... 

									
											On Mon, Nov 18, 2013 at 11:27 AM, Lelio Fulgenzi 
<lelio at uoguelph.ca> wrote:

										
												Can anyone comment/elaborate on what the Directory URI is used 
for in the LDAP sync setup screen in v9? It's set to 
"msRTCSIP-primaryuseraddress" by default. Unfortunately it's not modifiable 
after the relationship is setup and I'm not sure what to set it to.

												
												I'll also have to see what value it takes during an upgrade

												
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_01100.html#CUCM_RF_LE051F5C_00

												
												Sent from my iPhone

												_______________________________________________

												cisco-voip mailing list

												cisco-voip at puck.nether.net

												https://puck.nether.net/mailman/listinfo/cisco-voip

										
									itevomcid

							
						_______________________________________________

						cisco-voip mailing list

						cisco-voip at puck.nether.net

						https://puck.nether.net/mailman/listinfo/cisco-voip
				
			
	_______________________________________________

	cisco-voip mailing list

	cisco-voip at puck.nether.net

	https://puck.nether.net/mailman/listinfo/cisco-voip

	
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131121/740dae6a/attachment.html>