[cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

[Peter Slow]

...So, is there a particular scenario where the align partitions option _should_ be used? I can't think of one, if it blows away all your info... It must have been added for a reason, no?

Just curious,
-Pete

On Sep 27, 2013, at 12:27 PM, "Heim, Dennis" <Dennis.Heim at wwt.com> wrote:

> Thanks. I just saw it and was curious.
>  
> Dennis Heim | Solution Architect (Collaboration)
> World Wide Technology, Inc. | 314-212-1814
>  
> PS Engineering:  Innovate & Ignite.
>  
>  
> From: Joe Martini [mailto:joemar2 at cisco.com] 
> Sent: Friday, September 27, 2013 10:37 AM
> To: Mike
> Cc: Heim, Dennis; 'Cisco VOIP'
> Subject: Re: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2
>  
> Dennis,
>  
> The recovery disk option is not a way around rebuilding since the recovery disk warns that all data will be lost, thus a rebuild is still required.
>  
> <image001.png>
>  
> Joe
>  
>  
> On Sep 26, 2013, at 9:54 PM, Mike <mikeeo at msn.com> wrote:
>  
> Whats in 9.1.2 that makes this possible? I only have media for 9.1.1
>  
> From: Heim, Dennis [mailto:Dennis.Heim at wwt.com] 
> Sent: Thursday, September 26, 2013 9:49 PM
> To: Mike ; 'Cisco VOIP'
> Subject: RE: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2
>  
> I just did a 5.1(3g) -> 6.1(5) -> 7.1(5) -> 9.1(1) not that long ago. It is not a jump upgrade. I did try it to 9.1(2) at one point. It seemed to work, but you have unaligned partitions. You would need to do drs backup and restore.  I noticed with the 9.1(1) recovery disk there is the option to align partitions. I wonder if that is a way around rebuilding. I think a fresh backup and restore at the end is a good measure anyway.
>  
> Dennis Heim | Solution Architect (Collaboration)
> World Wide Technology, Inc. | 314-212-1814
>  
> PS Engineering:  Innovate & Ignite.
>  
>  
> From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike 
> Sent: Thursday, September 26, 2013 3:29 PM
> To: 'Cisco VOIP'
> Subject: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2
>  
> Couple questions.
>  
> I DMA’d to 7.1.5b on 7825 then DRS out to 7.1.5b in vmware .
>  
> Question is I don’t have a bootable copy of 9.1.2 so I was going to upgrade 7.1.5 vm using non-bootable and do the fresh install with 9.1.1 with an upgrade during install to 9.1.2.
>  
> Is this supported?
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130927/6eb89cc1/attachment.html>