[cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

[Ryan Ratliff (rratliff)]

Really it only saves you the step of creating a new VM. If you are tight on host resources or don't want to re-deply from OVA then you may go this route.


-Ryan

On Sep 27, 2013, at 3:16 PM, Peter Slow <peter.slow at gmail.com<mailto:peter.slow at gmail.com>> wrote:

...So, is there a particular scenario where the align partitions option _should_ be used? I can't think of one, if it blows away all your info... It must have been added for a reason, no?

Just curious,
-Pete

On Sep 27, 2013, at 12:27 PM, "Heim, Dennis" <Dennis.Heim at wwt.com<mailto:Dennis.Heim at wwt.com>> wrote:

Thanks. I just saw it and was curious.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


From: Joe Martini [mailto:joemar2 at cisco.com<http://cisco.com/>]
Sent: Friday, September 27, 2013 10:37 AM
To: Mike
Cc: Heim, Dennis; 'Cisco VOIP'
Subject: Re: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

Dennis,

The recovery disk option is not a way around rebuilding since the recovery disk warns that all data will be lost, thus a rebuild is still required.

<image001.png>

Joe


On Sep 26, 2013, at 9:54 PM, Mike <mikeeo at msn.com<mailto:mikeeo at msn.com>> wrote:

Whats in 9.1.2 that makes this possible? I only have media for 9.1.1

From: Heim, Dennis [mailto:Dennis.Heim at wwt.com<http://wwt.com/>]
Sent: Thursday, September 26, 2013 9:49 PM
To: Mike ; 'Cisco VOIP'
Subject: RE: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

I just did a 5.1(3g) -> 6.1(5) -> 7.1(5) -> 9.1(1) not that long ago. It is not a jump upgrade. I did try it to 9.1(2) at one point. It seemed to work, but you have unaligned partitions. You would need to do drs backup and restore.  I noticed with the 9.1(1) recovery disk there is the option to align partitions. I wonder if that is a way around rebuilding. I think a fresh backup and restore at the end is a good measure anyway.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike
Sent: Thursday, September 26, 2013 3:29 PM
To: 'Cisco VOIP'
Subject: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

Couple questions.

I DMA’d to 7.1.5b on 7825 then DRS out to 7.1.5b in vmware .

Question is I don’t have a bootable copy of 9.1.2 so I was going to upgrade 7.1.5 vm using non-bootable and do the fresh install with 9.1.1 with an upgrade during install to 9.1.2.

Is this supported?

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130930/890ff87f/attachment.html>