[cisco-voip] cucm 10.5(1) vs 10.0(1)

[Heim, Dennis]

I'd go with 10.5. Traditionally once the first non dot zero release is RTM, the dot zero no longer sees development and Cisco generally steers you toward upgrading off the .0.

Dennis Heim | Collaboration Solutions Architect
World Wide Technology, Inc. | +1 314-212-1814




-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of GR
Sent: Tuesday, July 08, 2014 8:23 AM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] cucm 10.5(1) vs 10.0(1)

Hi Guys,

Was just about to do a fresh installation of ucm/cuc/im&p on a Cisco BE6k. Is 10.5 mature enough to go ahead?

Anyone has anything to share on whether to go for a 10.0 or 10.5?

Googling didnot yield sufficient results - if anyone can share there first hand experience or thoughts would be great.

-gr

Sent from my iPhone
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip