[cisco-voip] MRA Expressway Edge 1 or 2 Ports?

[Boon]

We've rolled out MRA on Expressway 8.1.1 but we can only get it to work
properly with a 2-port Expressway-E setup which requires the Advanced
networking license.

Can anyone confirm if they've got it to work properly using the 1-port
method without the Adv Net license?

We had one-way audio issues using the single port solution. Also, the
documentation is not clear on this point.

TIA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140626/52df65b6/attachment.html>