[cisco-voip] CUPC - Unable to go into deskphone control mode and unable to chat

[Jeffrey Girard]

Ted -
          Thank you for taking the time to respond.

          Yes, there is a reason - its that Im trying to learn so Im taking it step by step.

          I intended to start with CUPC and then move to Jabber.

          I will check on your interoperability comments.

          Thanks for the Jabber link

Jeff
From: rotimm at gmail.com [mailto:rotimm at gmail.com] On Behalf Of Ted Nugent
Sent: Saturday, March 15, 2014 11:52 AM
To: Jeffrey Girard
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUPC - Unable to go into deskphone control mode and unable to chat

Is the a reason you're using CUPC as opposed to Jabber? I'm not sure CUPC is support on CUCM and IM&P 9.x?
If you were to use Jabber here is the JFW guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_6/InstallConfig/JABW_BK_CDFE9752_00_installation-and-configuration/JABW_BK_CDFE9752_00_installation-and-configuration_chapter_010.html


On Fri, Mar 14, 2014 at 6:11 PM, Jeffrey Girard <jeffrey.girard at girardinc.com<mailto:jeffrey.girard at girardinc.com>> wrote:
Home Lab - learning Presence

CUCM 9
CUPS 9 (not 8.6 as virtually all of the help and discussion forums, documents, etc are for)
CUPC 8.6 (3 copies running on 3 different laptops)
4 users configured in CUCM for Presence capabilities
No LDAP integration


Current status:
Presence indicators for phones works fine, no issues
3 users can log into their CUPC clients and Presence information from their own associated deskphone displays correctly (ie if User 1 takes his deskphone offhook, the CUPC for User 1 shows as "On the Phone"
Users can place phone calls with each other by typing the DN in the "Search for name or number" field

I have two different issues that I have not been able to solve all day - they may be related to each other.

The first issue:  I am unable to go into deskphone mode.  Although the checkbox is visible - it appears to be greyed out and clicking in it does nothing.
The second issue:  I am unable to start a chat session.  I highlite a contact (that I manually entered), right click, and select chat.  I get an error message that says "Failed to start conversation.  Invalid parameter"

I have scoured the Cisco site for docs and most of them pertain to CUPS 8.6 and not 9.  There is a difference in that v9 does not have the Application -> IP Phone Messenger selection.

My current configs:
CUCM
          4 application users - CUPS-AXL (with Stand CCM SuperUsers permissions), CUPS-Deskphone, CUPS-CTIGW, and CUPS-PhoneMSG (all with Standard CTI Allow control of all devices).
          3 end users - From top to bottom, all users have passwords and digest credentials.  Under Service Settings, all users have the "Enable user for Unified CM IM and Presence" checked.  This is the replacement for the assigning license capabilities from version 8.6.  Also under Service Settings, all users have a UC Service Profile assigned.  The UC Service Profile has two UC service settings - a Presence and IM Profile and a CTI Profile.  Under Device Information - all user have been associated to two different devices (their hardphone and the CUPC client).  Under the Directory Number Association portion - each user has their own primary line selected from the drop down box.  Under the Permissions Information section - each user has Standard CCM End Users and Standard CTI Enabled permissions.
          Devices - each user has a 7960 hard phone and a CUPC.  For each device (both types) at the Device Level -> Owner User ID, Protocol Specific Information -> BLF Presence Group, SUBSCRIBE CSS are all set.  Under the line for each device (both types) - Allow control of device from CTI is checked, in the Associated Devices window is the MAC and UPC<name> of the devices, Under Users Associated with Line is the correct user
          Under System -> Application Server,  the CUP server is configured.
          Under System -> Licensing, all users and devices are licensed.  There is no Capabilities Assignment in version 9

CUPS
          Under Diagnostics -> System Troubleshooter -> all green except for the things not configured, LDAP, 3rd party, etc
          User Management -> End User -> are licensed for IM and Presence and have Microsoft RCC enabled.  They also show 2 devices
          Under Application - this is where its different from v8 to v9.
          Application -> Legacy Clients -> Settings.  I have set the TFTP server IP to the CUCM
          Application -> Legacy Clients -> CCMCIP Profile.  I created a new profile, set the Primary and Secondary CCMCIP Host to be the IP Address of the CUCM Publisher.  For Server Certification Verfication, I selected Any Certificate from the drop down.  I assigned this profile to all 4 of my users.
          Application -> Microsoft RCC settings.  Application status = on.  For Application Username and password, I have tried using CUPS-Deskphone and CUPS-CTIGW with their appropriate passwords.  There is not difference in using either one of them.  CUCM address is address of my Pub.  I assigned this Microsoft RCC service to all 4 of my users.

So, as I said, I have been working on this all day today burning my fingers and my mouse up on Google.  To no avail.

Any ideas anyone?

Jeff

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140315/2fe9bffc/attachment.html>