[cisco-voip] 10.5 VMware Issue

Heim, Dennis Dennis.Heim at wwt.com
Wed May 14 23:19:24 EDT 2014


I ran into that with 10.0 about a month ago.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Wednesday, May 14, 2014 1:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 10.5 VMware Issue

Doing some testing with 10.5 and seemed to come across something related to this supposedly fixed bug. VMWare tools install doesn't fail, but tools aren't running unless I do the install in permissive mode. Once installed and enforcing mode is reenabled tools still works after a reboot.
Bug ID: https://tools.cisco.com/bugsearch/bug/CSCul78735
Not something I have time to spend on with TAC right now, but thought I'd throw it out there.


Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA
1965 Greenspring Drive
Timonium, MD 21093

direct voice. 443.541.1518
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>
Support Phone. 410.252.8830


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140514/34351f18/attachment.html>


More information about the cisco-voip mailing list