[cisco-voip] Transcoding on a CME for a CUE

[Anthony Kouloglou]

Hi Zolta,
how did this end? (if it did...)

BR
Anthony

Στις 7/2/2014 8:06 μμ, ο/η Buchanan, James έγραψε:
> Bear in mind that the default codec is g729br8, not g729r8 (which is probably what your carrier is using). You really need to specify a codec.
>
> James Buchanan | Sr. Network Engineer
> Presidio | www.presidio.com
> 12 Cadillac Drive Suite 130, Brentwood, TN 37027
> D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com
>
>
>
> PRESIDIO
> Practical thinking for a connected world.
>
>
> Follow Us: www.twitter.com/presidio
>
>
>
>
> ________________________________________
> From: cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of Zoltan.Kelemen at Emerson.com [Zoltan.Kelemen at Emerson.com]
> Sent: Friday, February 07, 2014 8:27 AM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Transcoding on a CME for a CUE
>
> Hi,
>
> Incoming codec is g.729. It does not show up in the config since that is the default setting on a dial-peer.
>
> I'm well aware, that the two codecs differ, I have no choice (WAN is strictly g729, CUE is g711 only). That is why I have transcoding set up, see my original email in the thread.
> I'm also aware that the call fails, because of codec mismatch.
>
> My problem is why? Why does the configured transcoding NOT work as expected?
> This will probably end up a TAC case early next week as I'm traveling right now, just wanted to get some opinions if I was doing anything obviously wrong and if I've missed something.
>
> Zoltan Kelemen
> Global Communications and Information Security
> Implementation Engineering
> Emerson
>
> -----Original Message-----
> From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andreas Sikkema
> Sent: Friday, February 07, 2014 3:24 AM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Transcoding on a CME for a CUE
>
> Zoltan,
>
>> The attached trace should have those debugs and more.
>>
>>
>>
>> Caller: +13***531042
>> Called: +19***465067
>>
>> Forwarded to voicemail extension: 5110
> Zoltan, the incoming call is G.729 only and all dialpeers in your config appear to be G.711 only.
>
>
> --
> Andreas Sikkema
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip