[cisco-voip] CUCMBE6K RAM requirement

[Abebe Amare]

Hi Mathew,

I will inspect the internal of the server physically to check whether it
has 8GB or 32 GB.

Thanks for the support, much appreciated.

Abebe


On Wed, May 28, 2014 at 4:56 PM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  If that is the part that is ordered all that is, is the version w/o
> strong encryption for certain countries. You should have 32GBs of RAM. If
> you don’t you have a problem and should be able to correct with your Disti
> or TAC as you got a bad product.
>
> Have you spun up the server and it actually only shows 8GBs?
>
>
>
> [image: cid:image001.jpg at 01C95158.4441E1B0]
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> direct voice. 443.541.1518
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
>
> Support Phone. 410.252.8830
>
>
>
> *From:* Abebe Amare [mailto:abucho at gmail.com]
> *Sent:* Wednesday, May 28, 2014 9:48 AM
> *To:* Matthew Loraditch
> *Cc:* cisco voip
> *Subject:* Re: [cisco-voip] CUCMBE6K RAM requirement
>
>
>
> Hi Mathew,
>
>
>
> The full order is spec is as below:
>
> *Part Number*
>
> *Description*
>
> BE6K-ST-BDL-XU=
>
> Cisco BE6000 UCS C220M3 MD Srv,UNRST 9.x SW,Hyp,UPM,VCS
>
> LIC-VCS-10+
>
> Video Comm Server 10 Add Non-traversal Network Calls
>
> CAB-9K10A-EU
>
> Power Cord, 250VAC 10A CEE 7/7 Plug, EU
>
> BE6K-SW-APP-9.X-XU
>
> Cisco Business Edition 6000 SW App Version 9.X Unrestricted
>
> CIT-PSU-BLKP
>
> Power Supply Blanking Panel/Filler
>
> CIT-SD-16G-C220
>
> 16GB SD Card Module for C220 servers
>
> CTI-VCSC-BE6K-PAK
>
> Config Only E-Delivery VCS Control PAK PID
>
> VMW-VS5-HYP-K9
>
> Cisco UC Virt. Hypervisor 5.x (2-socket)
>
> VMW-VS5-SNS
>
> Cisco UC Virt. Hypervisor 5.x - SnS
>
> LIC-VCS-BASE
>
> License Key - VCS Non-encrypted Software Image
>
> LIC-VCS-GW
>
> Enable GW Feature (H323-SIP)
>
> LIC-VCSE-5+
>
> Video Communication Server - 5 Traversal Calls
>
> R2XX-RAID10
>
> Enable RAID 10 Setting
>
> UC-A03-D500GC3
>
> 500GB  6Gb SATA  7.2K RPM SFF Hot Plug/Drive Sled Mounted
>
> UC-CPU-E5-2609
>
> 2.4 GHz E5-2609/80W 4C/10MB Cache/DDR3 1066MHz
>
> UC-MR-1X082RY-A
>
> 8GB DDR3-1600-MHz RDIMM/PC3-12800/Dual Rank/1.35v
>
> UC-PSU-650W
>
> 650W Power Supply Unit For UCSC C220 Rack Server
>
> UC-RAID-9271
>
> MegaRAID 9271-8i + Battery Backup for C240 and C220
>
>
>
> It looks like the part number they ordered is different to your
> recommendation of BE6K-ST-BDL-k9=
>
>
>
>
>
>
>
> On Wed, May 28, 2014 at 4:08 PM, Matthew Loraditch <
> MLoraditch at heliontechnologies.com> wrote:
>
>  If they bought the correct BE6K server bundle it would have come with
> the right RAM. It sounds like they got the wrong thing. I’d advise them to
> RMA and order the BE6K-ST-BDL-K9= part as I’m guessing they purchased a
> build to order C220 M3 and it’s not going to have come with the right
> entitlements or base software and is not discounted the same way as the
> bundle part.
>
>
>
>
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> direct voice. 443.541.1518
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
>
> Support Phone. 410.252.8830
>
>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Abebe Amare
> *Sent:* Wednesday, May 28, 2014 8:53 AM
> *To:* cisco voip
> *Subject:* [cisco-voip] CUCMBE6K RAM requirement
>
>
>
> Hi All,
>
>
>
> Customer has a single CUCMBE6K with 8GB of RAM (UCS C220M3 medisum
> density Server).
>
> . They want to install on it CUCM, UC, Presence and Informacast. According
> to the docwiki for BE6k implementation, for Medium Density (MD) server,
> co-residency policy supports for any 4 UC applications and 1 Provisioning
> application as long as they fit in 8vCPU and 32GvRAM. Does this mean they
> need to upgrade the RAM to 32 GB to accommodate all the servers?
>
>
>
> Thanks in advance,
>
>
>
> Abebe
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140528/9f93ad00/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33011 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140528/9f93ad00/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 10887 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140528/9f93ad00/attachment.png>