[cisco-voip] Door Opener Ring Delay

[Steven Sarte]

Anyone have experience with a Valcom 2901A door opener.  Have it working
with my 2911 and CUCM with an FXO port but their is a significant delay
when you press the button and when the IP Phone rings.

Tried both H.323 and MGCP with no difference.

Current config:
voice-port 0/1/0
 connection plar 8999
 description Valcom V-2901A Door Opener
 station-id name Door

dial-peer voice 101 voip
 destination-pattern 8999
 session target ipv4:<CUCM IP>
 voice-class codec 1
 voice-class h323 1
 dtmf-relay h245-alphanumeric
 no vad

I did try connection plar 8999 immediate (no change)
als connection plar opx 8999 (no change)

Thanks in advanced
Steven
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140917/748211ac/attachment.html>