[cisco-voip] Door Opener Ring Delay

[Charles Goldsmith]

Is there a delay when you plug it into an analog and take the router out of
the pic?  What I'm really asking, is the delay in the valcom or your
router/CUCM?

On Wed, Sep 17, 2014 at 9:40 PM, Steven Sarte <steven.sarte at gmail.com>
wrote:

> Anyone have experience with a Valcom 2901A door opener.  Have it working
> with my 2911 and CUCM with an FXO port but their is a significant delay
> when you press the button and when the IP Phone rings.
>
> Tried both H.323 and MGCP with no difference.
>
> Current config:
> voice-port 0/1/0
>  connection plar 8999
>  description Valcom V-2901A Door Opener
>  station-id name Door
>
> dial-peer voice 101 voip
>  destination-pattern 8999
>  session target ipv4:<CUCM IP>
>  voice-class codec 1
>  voice-class h323 1
>  dtmf-relay h245-alphanumeric
>  no vad
>
> I did try connection plar 8999 immediate (no change)
> als connection plar opx 8999 (no change)
>
> Thanks in advanced
> Steven
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140917/6e45b145/attachment.html>