[cisco-voip] Door Opener Ring Delay

[Steven Sarte]

When trying with an analog phone, no delay.

What I did notice is that when running the debug vpm signal, the door
button is pressed their is a delay about 10-12 seconds then the IP Phone
rings and then I start seeing the debugs.

Of course Cisco and Valcom state their are no issues.

On Thu, Sep 18, 2014 at 12:21 AM, Charles Goldsmith <wokka at justfamily.org>
wrote:

> Is there a delay when you plug it into an analog and take the router out
> of the pic?  What I'm really asking, is the delay in the valcom or your
> router/CUCM?
>
> On Wed, Sep 17, 2014 at 9:40 PM, Steven Sarte <steven.sarte at gmail.com>
> wrote:
>
>> Anyone have experience with a Valcom 2901A door opener.  Have it working
>> with my 2911 and CUCM with an FXO port but their is a significant delay
>> when you press the button and when the IP Phone rings.
>>
>> Tried both H.323 and MGCP with no difference.
>>
>> Current config:
>> voice-port 0/1/0
>>  connection plar 8999
>>  description Valcom V-2901A Door Opener
>>  station-id name Door
>>
>> dial-peer voice 101 voip
>>  destination-pattern 8999
>>  session target ipv4:<CUCM IP>
>>  voice-class codec 1
>>  voice-class h323 1
>>  dtmf-relay h245-alphanumeric
>>  no vad
>>
>> I did try connection plar 8999 immediate (no change)
>> als connection plar opx 8999 (no change)
>>
>> Thanks in advanced
>> Steven
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140918/3eb89cca/attachment.html>