[cisco-voip] vSwitch in Active/Standby

[Jason Aarons (AM)]

I can't recall and don't have access to this right now to ESXi 5 to check.

If I configure in ESXi a vSwitch2 as Active/Standby, then the second NIC in Standby on the 3750 Switchport would show down/down right?  Or will it show up/up and ESXi will "activate" it as needed.

Discussing if the Standby 3750 Switchport has to go Up and run thru Spanning Tree (if portfast is not configured) during Active/Standby failover.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140919/4f34a9d3/attachment.html>