[cisco-voip] Digicert Wildcard certificates

[NateCCIE]

Did you put all of your SANs in the digicert page?

I have this working on all of my expressway installs. 

Sent from my iPhone
+1 801 718 2308

> On Jul 15, 2015, at 7:35 AM, Ian Anderson <ia at andersoi.co.uk> wrote:
> 
> Hi All,
> 
> I'm resurrecting an old thread from the deep, where Nate suggested using DigiCert wildcard certificates for UC infrastructure.
> 
> I'm trying to use some of these for a Expressway MRA implementation, and am struggling with the TLS-verification between the Expressway-E and Expressway-C.  
> 
> There are a few posts out there on 'tinternet that seem to suggest that Wildcard certificates aren't supported, however Nate's post below indicated that the digicert wildcards worked fine with expressway.  
> 
> Before I put a permanent dent in this desk with my head, has anyone else had success with Digicert wildcard certs in an Expressway MRA deployment?
> 
> Cheers
> 
> Ian
> 
> 
> > On 5 Feb 2015, at 16:51, NateCCIE <nateccie at gmail.com> wrote:
> > 
> > Use DIGICERT!  You can get a wildcard cert from them, and use it over and over.  So you just generate the cert based on the CSR from each app and it loads right in.
> > 
> > Works great on CUCM, CUC, CUP, & Expressway!
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150715/aaff19ee/attachment.html>