[cisco-voip] installing v9 collab software on 7845H2 equivalent

[Lelio Fulgenzi]

OK, grasping at straws here, I know. I'm just trying to buy some (more) time before we dive into UC on UCS. 

I've got a pile of HP DL380G5s that I'm trying to retrofit into a 7845H2 swonly equivalent. All the parts are the same as far as I can tell, I only had to swap in two older XEON 5140 CPUs. 

The v7 install (as a test) seems to go without any problems, but the v9 install (of CUCM, UCCx, IM&P) seems to constantly want to reboot at the configuring machine BIOS/RAID firmware. 

I've got another DL380G5 working fine (bought as a package), and the only thing different that I can see is that the firmware on the one I'm trying to retrofit is v7.24 and the other I have is v7.22. 

Does anyone recall a problem like this and what the solution was? 

Lelio 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150310/ec62939c/attachment.html>