[cisco-voip] installing v9 collab software on 7845H2 equivalent

[Jonathan Charles]

I am pretty sure v8.6 is as far as you can go on a G5...  just an FYI,
version 10 has no bare-metal installation...


Jonathan

On Tue, Mar 10, 2015 at 10:09 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> OK, grasping at straws here, I know. I'm just trying to buy some (more)
> time before we dive into UC on UCS.
>
> I've got a pile of HP DL380G5s that I'm trying to retrofit into a 7845H2
> swonly equivalent. All the parts are the same as far as I can tell, I only
> had to swap in two older XEON 5140 CPUs.
>
> The v7 install (as a test) seems to go without any problems, but the v9
> install (of CUCM, UCCx, IM&P) seems to constantly want to reboot at the
> configuring machine BIOS/RAID firmware.
>
> I've got another DL380G5 working fine (bought as a package), and the only
> thing different that I can see is that the firmware on the one I'm trying
> to retrofit is v7.24 and the other I have is v7.22.
>
> Does anyone recall a problem like this and what the solution was?
>
> Lelio
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150310/c7ad10ca/attachment.html>