[cisco-voip] ATA190 Plar SIP Dial Rule

[Brian Meade]

Right, that's correct.  Add 2 PLARs to the SIP Dial Rule with descriptions
both with just a button parameter.

I've used this for ATA 188s but haven't tested specifically on the 190.

On Fri, Mar 13, 2015 at 3:46 PM, Barry Howser <bhowser5050 at gmail.com> wrote:

> hi Brian,
>
> So what you're saying is that in the SIP dial rule; I'll click the "Add
> Plar" button and then give my parameter a description, select "Button" as
> my dial parameter then in the value box I'd enter a "1" or a "2" depending
> on if I wanted the *PLAR* working on line 1 or 2 of the ATA.
>
> I would then assume that if I wanted both ATA lines to plar, I would have
> two parameters in the SIP dial rule?
>
> Oyyyy ..... I wish you would write Cisco docs .... I can understand you,
> lol.
>
>
> On Fri, Mar 13, 2015 at 3:38 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
>> For the SIP Dial Rule, all you want it to have is a PLAR with Button 1
>> set.  Don't enter the number you want to PLAR to.  Then just set up PLAR
>> like you would for a SCCP phone with a new CSS/partition/blank translation
>> pattern.
>>
>> On Fri, Mar 13, 2015 at 3:30 PM, Barry Howser <bhowser5050 at gmail.com>
>> wrote:
>>
>>> Hello everyone.
>>>
>>> I have an ATA190 that needs to do a plar to 911. My dial plan uses "9"
>>> to access an outside line (including the 911 pattern).
>>>
>>> I created a SIP dial rule and added a plar pattern. I added a parameter
>>> called "911" in the description and then added 9911 in the value field. I
>>> saved, applied config and restarted.
>>>
>>> I have applied that SIP Dial Rule to the ATA190 device's sip dial rule
>>> section and reset the ATA. When I take either of the lines off hook with an
>>> analog phone, I just get dial tone .... no PLARing.
>>>
>>> What am I doing wrong?
>>>
>>> thanks
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150313/0b4793b5/attachment.html>