[cisco-voip] ATA190 Plar SIP Dial Rule

[Brian Meade]

Sorry, it was the ATA187s I tried this on.  Can you attach a screenshot of
your dial rule config?

On Fri, Mar 13, 2015 at 4:15 PM, Brian Meade <bmeade90 at vt.edu> wrote:

> Right, that's correct.  Add 2 PLARs to the SIP Dial Rule with descriptions
> both with just a button parameter.
>
> I've used this for ATA 188s but haven't tested specifically on the 190.
>
> On Fri, Mar 13, 2015 at 3:46 PM, Barry Howser <bhowser5050 at gmail.com>
> wrote:
>
>> hi Brian,
>>
>> So what you're saying is that in the SIP dial rule; I'll click the "Add
>> Plar" button and then give my parameter a description, select "Button" as
>> my dial parameter then in the value box I'd enter a "1" or a "2" depending
>> on if I wanted the *PLAR* working on line 1 or 2 of the ATA.
>>
>> I would then assume that if I wanted both ATA lines to plar, I would have
>> two parameters in the SIP dial rule?
>>
>> Oyyyy ..... I wish you would write Cisco docs .... I can understand you,
>> lol.
>>
>>
>> On Fri, Mar 13, 2015 at 3:38 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> For the SIP Dial Rule, all you want it to have is a PLAR with Button 1
>>> set.  Don't enter the number you want to PLAR to.  Then just set up PLAR
>>> like you would for a SCCP phone with a new CSS/partition/blank translation
>>> pattern.
>>>
>>> On Fri, Mar 13, 2015 at 3:30 PM, Barry Howser <bhowser5050 at gmail.com>
>>> wrote:
>>>
>>>> Hello everyone.
>>>>
>>>> I have an ATA190 that needs to do a plar to 911. My dial plan uses "9"
>>>> to access an outside line (including the 911 pattern).
>>>>
>>>> I created a SIP dial rule and added a plar pattern. I added a parameter
>>>> called "911" in the description and then added 9911 in the value field. I
>>>> saved, applied config and restarted.
>>>>
>>>> I have applied that SIP Dial Rule to the ATA190 device's sip dial rule
>>>> section and reset the ATA. When I take either of the lines off hook with an
>>>> analog phone, I just get dial tone .... no PLARing.
>>>>
>>>> What am I doing wrong?
>>>>
>>>> thanks
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150313/b51397f1/attachment.html>