[cisco-voip] VG350 analog ports

[Leslie Meade]

I think i have found the issue


https://supportforums.cisco.com/discussion/12286521/vg350-sccp-ports-losing-dial-tone?


Mind you I am running older code 15.1 but I think it is the same


Cheers



Leslie


________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Leslie Meade <Leslie.Meade at lvs1.com>
Sent: Tuesday, March 31, 2015 4:45 AM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] VG350 analog ports


Any one seen a problem where an analog phone gets battery/voltage but no ring tone. the phone will not work. However if you ring it everything works well. You are then able to lift the handset and get dial tone and make calls. Give the port X amount of time and you loose dial tone again.


Cheers


Leslie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150331/befbd9ad/attachment.html>