[cisco-voip] CUCM Self Provisioning...

[Jonathan Charles]

That did it, thanks!... I had to reboot the pub after for some reason...
not sure why...

On Wed, Sep 30, 2015 at 4:55 PM, Brian Meade <bmeade90 at vt.edu> wrote:

> You need to make sure you have 2 universal device templates.  One for the
> users that have been provisioned and one for new phones set under the
> Auto-registration section.
>
> On Wed, Sep 30, 2015 at 5:07 PM, Jonathan Charles <jonvoip at gmail.com>
> wrote:
>
>> OK, cool... but as soon as I did that, I get a host not found on the new
>> phones when they try to load the idle page... weird thing is I checked the
>> URL that the phones picked up, and they open an XML page fine from that
>> vLAN...
>>
>>
>> Jonathan
>>
>> On Wed, Sep 30, 2015 at 1:27 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> You need to make another Universal Device Template without the Idle URL
>>> set and assign that to the user profile.
>>>
>>> On Wed, Sep 30, 2015 at 2:06 PM, Jonathan Charles <jonvoip at gmail.com>
>>> wrote:
>>>
>>>> We are using Self Provisioning to have users configure their phones...
>>>>
>>>> https://CUCMPUB.bananaco.com:443/cucm-uds/xps/selfProvision
>>>>
>>>> Which works fine... except... after they login and the phone
>>>> reconfigures, we still have the idle screen asking for them to login for
>>>> self provisioning... how do we make this go away after they have
>>>> provisioned their phone?
>>>>
>>>>
>>>>
>>>> Jonathan
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151004/9c21d250/attachment.html>