[cisco-voip] Is there a CLI command to show the MTU size ?

[Brian V]

The only place I can find to SHOW the current MTU size is from the OS 
Admin GUI under the
Show/Network menu.

from the CLI none of the "show network" commands seem to have it.
I recently tested (this past weekend) on CUCM 9.1.2 and 10.5.2SU2a

Is it hiding somewhere else in the CLI commands or is the web GUI the 
only place to check on the status?

I know the command to change the MTU is "set network mtu XXX" but can't 
find a CLI to _show_ the current MTU.

What am I missing.
Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150914/ffcf80a8/attachment.html>