[cisco-voip] Is there a CLI command to show the MTU size ?

[Brian V]

Awesome.  Thanks for the tip.
should have used the top secret, CCIE  "?" command.   :)


On 9/14/2015 11:36 AM, Chris Ward (chrward) wrote:
>
> show network eth0 detail
>
> +Chris
>
> TME - MediaSense and Unity Connection
>
> *From:*cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On 
> Behalf Of *Brian V
> *Sent:* Monday, September 14, 2015 12:32 PM
> *To:* Cisco VOIP <cisco-voip at puck.nether.net>
> *Subject:* [cisco-voip] Is there a CLI command to show the MTU size ?
>
> The only place I can find to SHOW the current MTU size is from the OS 
> Admin GUI under the
> Show/Network menu.
>
> from the CLI none of the "show network" commands seem to have it.
> I recently tested (this past weekend) on CUCM 9.1.2 and 10.5.2SU2a
>
> Is it hiding somewhere else in the CLI commands or is the web GUI the 
> only place to check on the status?
>
> I know the command to change the MTU is "set network mtu XXX" but 
> can't find a CLI to _show_ the current MTU.
>
> What am I missing.
> Thanks
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150914/1e96b98d/attachment.html>