[cisco-voip] CUCM 10.0.1 location out of resources fix?

[Anthony Holloway]

Can you just restart the Location Bandwidth Manager service?  I think
that's what I've done in the past.  Also of note, if you stop the LBM, all
calls are permitted, not denied.  So, you technically could run with the
service stopped for a short while.

On Wed, Sep 16, 2015 at 2:23 PM Barnett, Nick <
Nick.Barnett at countryfinancial.com> wrote:

> This is the first time this has popped up since our upgrade from 8.6.2 to
> 10. I know the location and CAC has changed with 10, but is there still a
> way to resync bandwidth when CUCM thinks the link is saturated?
>
>
>
> We aren’t using any enhanced locations or anything fancy. Our locations
> have remained untouched since the upgrade. Today, we received the location
> out of bandwidth message in RTMT. Any pointers on resolving this in 10? I
> can’t locate a “resync bandwidth” option.
>
>
>
> Thanks,
>
> Nick
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150916/44c01638/attachment.html>