[cisco-voip] Caller ID issue

[Brian Meade]

Some people claim it works okay with MGCP as long as you're on CUCM 8.x and
higher above a certain IOS version.  It's definitely easier to just switch
to H.323 or SIP though.

On Wed, Feb 3, 2016 at 12:49 PM, Ryan Huff <ryanhuff at outlook.com> wrote:

> You'll need to CFG the gateway as h.323 (at least for that FXO port). CLID
> doesn't work on FXO ports controlled by mgcpapp . You can run a "*debug
> vpm port x/x/x*" and that should show the calling name received on the
> FXO port, but if the port is under mgcpapp control, it won't pass the IE to
> CCM.
>
>
> Thanks,
>
>
> = Ryan =
>
>
>
> Email: ryanthomashuff at outlook.com
>
> Spark: ryanthomashuff at outlook.com
>
> Twitter: @ryanthomashuff <http://twitter.com/ryanthomashuff>
>
> LinkedIn: ryanthomashuff <http://linkedin.com/in/ryanthomashuff>
>
> Web ryanthomashuff.com
>
>
> ------------------------------
> *From:* cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of
> Brian Meade <bmeade90 at vt.edu>
> *Sent:* Wednesday, February 3, 2016 12:38 PM
> *To:* David Zhars
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Caller ID issue
>
> What CUCM/IOS version?  Do you have "Enable Caller ID" checked on the MGCP
> FXO device?  You should have "caller-id enable" under the voice-port on the
> router.
>
> http://www.gossamer-threads.com/lists/cisco/voip/131620
>
> On Wed, Feb 3, 2016 at 12:28 PM, David Zhars <dzhars at gmail.com> wrote:
>
>> Sorry, just noticed in that example they reference ISDN.  Again, calls
>> coming in on ISDN are fine, we get name and number.
>> It's when calls come in on the POTS lines that we just get the phone
>> number.
>>
>> On Wed, Feb 3, 2016 at 12:27 PM, David Zhars <dzhars at gmail.com> wrote:
>>
>>> ISDN works fine.  It's when the calls come in on the POTS line.
>>>
>>> I did find this by googling:
>>>
>>> interface serialx/x/x:23
>>> isdn supp-service name calling
>>>
>>> I am not sure about the :23 after the serial port designation...
>>>
>>>
>>> On Wed, Feb 3, 2016 at 12:23 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>>>
>>>> Does the carrier send the caller name in the ISDN Setup message or in a
>>>> separate Facility message?  Can you show "debug isdn q931" for one of these
>>>> inbound calls?
>>>>
>>>> On Wed, Feb 3, 2016 at 12:13 PM, David Zhars <dzhars at gmail.com> wrote:
>>>>
>>>>> Cisco UCM 8.0 with 2801 in MGCP mode.
>>>>> Telco is sending Name and Number to us.
>>>>> Phones only ever display Number.
>>>>>
>>>>> In UCM, selected phones have both Caller Name and Caller Number ticked.
>>>>>
>>>>> Anything else could be preventing us from getting Names?
>>>>>
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> cisco-voip at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160203/23ca4183/attachment.html>