[cisco-voip] Cisco 4331 Voice router

Jose Colon II jcolon424 at gmail.com
Thu Mar 10 18:19:35 EST 2016


Thanks guys. I think the thing that is getting me is that it was bought
without the PVDM on the NIM. Have to go back and adjust hardware.
On Mar 10, 2016 5:17 PM, "Ryan Huff" <ryanhuff at outlook.com> wrote:

> Jose,
>
>
> You'll be doing essentially the same thing as the G2s; IOS-XE just changes
> up the syntax a bit. Have a look at:
> http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html,
> that should get you started (pay particular attention to the clocking
> commands).
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> * |----- CONFIG SAMPLE -----|    card type t1 0 2  !  isdn switch-type
> primary-ni  !  network-clock synchronization automatic  network-clock
> synchronization participate 0/2  !  voice-card 0/2  dsp services dspfarm  !
>  controller T1 0/2/0  framing esf  linecode b8zs  !    clock source line
> primary    network-clock input-source 1 controller t1 0/2/0  cablelength
> long 0db  pri-group timeslots 1-24 voice-dsp  !  interface Serial0/2/0:23
>  encapsulation hdlc  isdn switch-type primary-ni  no cdp enable ! *
>
>
> *|----- CONFIG SAMPLE -----|*
>
>
> Thanks,
>
>
> = Ryan =
>
>
>
> Email: ryanhuff at outlook.com
>
> Spark: ryanhuff at outlook.com
>
> Twitter: @ryanthomashuff <http://twitter.com/ryanthomashuff>
>
> LinkedIn: ryanthomashuff <http://linkedin.com/in/ryanthomashuff>
>
> Web ryanthomashuff.com
>
>
> ------------------------------
> *From:* cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Jose
> Colon II <jcolon424 at gmail.com>
> *Sent:* Thursday, March 10, 2016 5:46 PM
> *To:* Cisco VOIP
> *Subject:* [cisco-voip] Cisco 4331 Voice router
>
> I am setting up a 4331 for voice for the first time and was hoping to find
> one of you with a working config. Looks like there are some differences
> from the 2900 services and more specifically around the DSP's.
>
> I have a Cisco ONE licensed 4331 with a T1 card and a 2 port FXO card.
> Thanks in advance.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160310/e28d652b/attachment.html>


More information about the cisco-voip mailing list