[cisco-voip] Cisco 4331 Voice router

[Jose Colon II]

So it looks like it was ordered correctly however the PVDM chip is the same
chip that goes in the NIM. So cisco put it on the MB instead of how it was
ordered on the NIM. I believe I should be able to just move it from the MB
to the NIM.
On Mar 10, 2016 5:19 PM, "Jose Colon II" <jcolon424 at gmail.com> wrote:

> Thanks guys. I think the thing that is getting me is that it was bought
> without the PVDM on the NIM. Have to go back and adjust hardware.
> On Mar 10, 2016 5:17 PM, "Ryan Huff" <ryanhuff at outlook.com> wrote:
>
>> Jose,
>>
>>
>> You'll be doing essentially the same thing as the G2s; IOS-XE just
>> changes up the syntax a bit. Have a look at:
>> http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html,
>> that should get you started (pay particular attention to the clocking
>> commands).
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> * |----- CONFIG SAMPLE -----|    card type t1 0 2  !  isdn switch-type
>> primary-ni  !  network-clock synchronization automatic  network-clock
>> synchronization participate 0/2  !  voice-card 0/2  dsp services dspfarm  !
>>  controller T1 0/2/0  framing esf  linecode b8zs  !    clock source line
>> primary    network-clock input-source 1 controller t1 0/2/0  cablelength
>> long 0db  pri-group timeslots 1-24 voice-dsp  !  interface Serial0/2/0:23
>>  encapsulation hdlc  isdn switch-type primary-ni  no cdp enable ! *
>>
>>
>> *|----- CONFIG SAMPLE -----|*
>>
>>
>> Thanks,
>>
>>
>> = Ryan =
>>
>>
>>
>> Email: ryanhuff at outlook.com
>>
>> Spark: ryanhuff at outlook.com
>>
>> Twitter: @ryanthomashuff <http://twitter.com/ryanthomashuff>
>>
>> LinkedIn: ryanthomashuff <http://linkedin.com/in/ryanthomashuff>
>>
>> Web ryanthomashuff.com
>>
>>
>> ------------------------------
>> *From:* cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of
>> Jose Colon II <jcolon424 at gmail.com>
>> *Sent:* Thursday, March 10, 2016 5:46 PM
>> *To:* Cisco VOIP
>> *Subject:* [cisco-voip] Cisco 4331 Voice router
>>
>> I am setting up a 4331 for voice for the first time and was hoping to
>> find one of you with a working config. Looks like there are some
>> differences from the 2900 services and more specifically around the DSP's.
>>
>> I have a Cisco ONE licensed 4331 with a T1 card and a 2 port FXO card.
>> Thanks in advance.
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160310/45f29ee0/attachment.html>