[cisco-voip] SIP Profile to add Calling Name

[Nick]

Hi Mike, apologies yes this is with CUBE, that looks good I will give this
a try, they are already in 15.4 so will try inbound first, many thanks for
your suggestion.
KR, Nick

On 28 November 2016 at 23:03, Norton, Mike <mikenorton at pwsd76.ab.ca> wrote:

> Is there a CUBE? You don’t say, but I’m assuming so. I would do something
> like this on the CUBE:
>
>
>
> request ANY sip-header From modify "^(.+):.*<sip:(.+)@" "\1: \"\2\"
> <sip:\2@"
>
>
>
> That should take the part of the SIP address before the @ and put it at
> the beginning in quotes like the old provider did. If any calls do come in
> with an actual name, this will wipe that name out (not sure if that’s
> desirable/relevant).
>
>
>
> Just remember that using SIP profiles for inbound requires IOS >= 15.4 and
> that inbound profiles has to be explicitly turned on. Alternatively, doing
> it on an outbound profile towards CUCM might meet your needs as well.
>
>
>
> -mn
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Nick via cisco-voip
> *Sent:* November-26-16 2:21 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] SIP Profile to add Calling Name
>
>
>
> Hi All
>
>
>
> I have a situation where we have migrated from one SIP trunk to another,
> when the inbound call comes in, the IP phone handset shows Unknown Caller
> ID and then display the calling number below, this client has 6921 handsets
> throughout which will only display one line so they only see the Unknown
> Caller ID on the handset.
>
>
>
> The Invite on the old SIP trunk show the From field with the
> calling number in brackets in front of the SIP portion as below and this
> works fine.
>
> *From:
> "07918900845"<sip:07918900845 at siptrunking08a.ipmultimedia.co.uk;user=phone>;tag=SDtmhce01-87069*
>
>
>
> The invite on the new SIP trunk does not display the number in front of
> the From field as below
>
>
>
> *From: <sip:07918900845 at 81.10X.XX.XX;user=phone>;tag=3689138628-619971*
>
>
>
> What I would like to do is modify the From field in the invite so that it
> displays the calling number in front of the as per the above example.
>
>
>
> It appears to be an issue with Calling Name as if I receive the call on a
> translation pattern on CUCM and set Calling Name Presentation to
> Restricted, I don't see the Unknown Caller ID anymore, the issue with this
> is that Missed calls / Received Calls lists on the phone shows Private
> Number.
>
>
>
> Can this be done with a inbound SIP Profile or SIP normalisation script?
>
>
>
> Regards
>
>
>
> Nick
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161129/b927a046/attachment.html>