[cisco-voip] 88xx Actionable Incoming Call Alert - Half Displayed

[Brian Meade]

I'd get some ISDN Q931 debugs for a good/bad call so you can see if it is
just sending the calling name later in only the non-working calls.

On Mon, Oct 31, 2016 at 1:08 PM, Treu, Joseph <joseph.treu at dechert.com>
wrote:

> We’re migrating to 8861/8865’s.  The standard configuration is “Actionable
> Incoming Call Alert = Show for all Incoming Call” (Override Common Setting
> = yes).
>
>
>
> For a majority of calls for some locations the Alert only half displays
> almost fully cutting off “Answer, Decline, Ignore”.  For one location, this
> doesn’t happen at all and the Alert is fully displayed.
>
> This sounds like CSCva42814 but different calls on the same gateway
> sometimes Alert fully others do not.
>
>
>
> Has anyone experienced?  Supposedly, this is resolved in 11.5(1)ES5, is
> anyone on that release with these endpoints and configurations?
>
>
>
> Thanks!
>
>
>
>
>
> Joseph Treu
>
> 2929 Arch Street
>
> Philadelphia, Pa.  19104
>
> 215-994-2912 (Direct)
>
> 267-475-8348 (Cell)
>
>
> ------------------------------
> This e-mail is from Dechert LLP, a law firm, and may contain information
> that is confidential or privileged. If you are not the intended recipient,
> do not read, copy or distribute the e-mail or any attachments. Instead,
> please notify the sender and delete the e-mail and any attachments. Thank
> you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161031/b3e34e2b/attachment.html>